Website map|Add to favouritesWelcome to Ahead Technology(Shen Zhen) Co.,LTD

AHEAD product
Current location: HomeAheadMold News » Ahead News
Injection Mold Temperature[ 01-08 09:47 ]
Not only injection mold temperature determines melt temperature as it moves quickly through the mold. The melt temperature itself as it starts its journey through the injection mold (self-evidently) is the reference point. Speed of injection, particularly in thin sections, is of huge influence, as it will determine ......
PPSU Parts Mold Making Company[ 01-06 10:08 ]
As we know, PPSU is high performance plastic material,they are used more and more in the medical and food field. First of all, let us to learn the character of the PPSU: High Heat, High Impact Performance The high heat resistance and excellent hydrolytic stability of PPSU make it an excellent choice for hot water fittings and ......
Injection Mold Manufactuer Welcome New Technologies[ 01-06 10:06 ]
In order to produce save costs and time in the process of plastic injection molding and improve production efficiency of injection mold, mold manufacturers increasing use of new materials and new technologies, and these new materials and new technologies in a certain extent, represent plastic injection mold manufacturing a new ......
Injection Mold Making for Medical Devices[ 01-06 10:03 ]
Medical devices usually make direct or indirect contact with human body, it has high standard requirements on mold design and mold making, typical characters of medical parts are high required finish surface, particular structure design, tight tolerance, and food safe material, it is a challenge to the mold makers and ......
Injection Mold Is A Heat Exchanger Needs Cooling[ 01-06 09:50 ]
As once explained to me years ago by one of my mentors in the plastic injection molding industry, an injection mold is nothing more than a "Heat Exchanger" which receives hot material, thus raising the mold temperature, and then, using cool liquid (Usually water) cools the injection mold to solidify the finished part to the point where it can ......
Injection Mold Cooling[ 01-04 13:55 ]
Most of my injection experience is in optical lens, so stress (optical birefringence) is visible and to be avoided. We molded opthalmic lenses and magnifiers so we had high aspect ratio parts. We measured part deformation with a Zeiss CMM. We also added dyes to the products, mixing in the injection molding extruder ......
Hydraulic vs Electric Injection Molding Machine[ 01-04 13:53 ]
It has been proven that electric injection molding machines are much better than hydraulics for many reasons such as, less power consumption, very quiet operation, no oil leaks, repeatability, independent drives (it is easy to achieve parallel movement of the injection molding machine), reliability, no linear transducers and ideal for ......
How To Measure A Good Plastic Injection Mold Manufacturer[ 01-04 13:46 ]
Choosing a good plastic injection mold manufacturer is a challenging work.What’s most concern is about the price. Not many manufacturer can gives a good price injection mold service, particular in USA. We know that the labor cost in USA is 8 times higher than China. So, the result is ......
Rapid Prototying[ 12-31 10:27 ]
Nowadays, the economy develops faster and faster, it creates a more and more demand for new product. as we all know, if we need plastic product or a plastic spare part, we should make a mold, but the mold will cost very much and take a long time, if our design is not good or not accepted by ......
Plastic Mold Apprearance Check[ 12-31 10:23 ]
1,Mold surface is free of pits, rust, extra unused rings, water fitting, gas, other defect which affect the appearance of the hole, etc., 2,more than 1.5mm chamfer on all mold plates. 3,the cooling fitting should be upper than the mold surface, and is better to locate in unoperate side 4 every lift ring should be marked their size if ......
Injection Mold Design[ 12-31 10:19 ]
We do plastic injection mold design in China, along with plastic product design and development, and other tooling requirements. We feel we offer a unique perspective in plastic injection mold and product design. Having decades of injection mold design experience allows us to ......
Glossary N[ 12-30 09:46 ]
NC (numerical control) 数控 near-net shape 近终形状 necessitate 需要 necking 缩口 net-shape 最终形状 neutral axis 中性轴,中性层 nickel alloy 镍合金 nickel-based alloy 镍基合金 nimonic 镍铬钛合金 ......
Glossary M[ 12-30 09:31 ]
machinability 机械加工性,切削性 machinable 可加工的 machine cell 机加工单元 machine control unit 机床控制单元 machine tool 机床 machine-specific 指定的设备 machining 机械加工,切削加工 ......
Glossary L[ 12-29 13:57 ]
ladling 浇注 lake sand 湖沙 laminate 碾压 laminating material 层压材料 lancing 切缝,切口 landing-bear 着陆,降落 lateral 横向的,侧面的 layout 布局图,版面设计 lead 铅,领导,致使 ......
Glossary K[ 12-29 13:52 ]
key feature 主要特征 keyboard 键盘 kinetic energy 动能 knob 旋钮,球形捏手 knockout pin 顶出杆 knuckle-joint mechanical press 肘接式压 力机 ......
Total number of records:306 | Pages:21  <...45678910111213...>  

Contact Ahead

Linkman: Tina Liu

Tel: +86-755-23426229

FAX: +86-755-29904981

Skype:tinaliu0128

E-mail:
tina@aheadmold.com

Add: No.36 Shiwei Pinggang Industrial Area, Jiangshi Community, Gongming Street, Guangming New District, Shenzhen, China 518106.

CONTACT

Ahead Technology(Shen Zhen) Co.,Ltd No.36 Shiwei Pinggang Industrial Area, Jiangshi Community,Gongming Street, Guangming New District, Shenzhen, China 518106

Phone: +86-755-23426229

Fax: +86-755-29904981

E-mail:tina@aheadmold.com

Stay in Touch

Sign up for our newsletter to receive event updates and exclusive offers

  • Email Address:
  • Leave your words here: